Raspberry Pi 3, Model B+, BCM2837B0, SoC, IoT, PoE Enabled, 1Gb SDRAM, RPI3-MODBP

Livrare

Ofertă specială de transport pentru persoane fizice*.

*)Pentru a afla condiţiile de livrare gratuită apăsaţi aici.

Mareste

Raspberry Pi 3, Model B+, BCM2837B0, SoC, IoT, PoE Enabled, 1Gb SDRAM, RPI3-MODBP

Denumire Produs: RPI3-MODBP

COD: 78698

Preț: 229,00 RON

(Pretul include TVA)

In stoc

Adaugati la lista de preferinte

Cantitate:

Descriere
Data Sheet
Caracteristici
Recenzii
Etichete
Trimiteti unui prieten
Am găsit o greşeală

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range,

boasting a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz

and 5 GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability

via a separate PoE HAT

Raspberry Pi 3, Model B+, BCM2837B0, SoC, IoT, PoE Enabled

Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC @ 1.4GHz

1GB LPDDR2 SDRAM

2.4GHz/5GHz IEEE 802.11 b/g/n/ac Wireless LAN (WLAN)

Bluetooth Low Energy v4.2 (BLE)

Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)

4 x USB 2.0 Ports

Extended 40-pin GPIO Header

Full Size HDMI, MIPI DSI display port, MIPI CSI camera port

4-pole stereo audio/composite video output port

MicroSD card slot for operating system and data storage

Power over Ethernet (PoE) enabled (requires separate PoE HAT)

Power supply requirements - 5V/2.5A DC via micro USB or GPIO

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz/5GHz IEEE 802.11 b/g/n/ac Wireless LAN (WLAN)
Bluetooth Low Energy v4.2 (BLE)
Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
4 x USB 2.0 Ports
Extended 40-pin GPIO Header
Full Size HDMI, MIPI DSI display port, MIPI CSI camera port
4-pole stereo audio/composite video output port
MicroSD card slot for operating system and data storage

Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Power supply requirements, 5V/2.5A, DC, via micro USB or GPIO

Aplications

Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things)

Raspberry Pi board only

Raspberry Pi 3, Model B+, BCM2837B0, SoC, IoT, PoE Enabled

ATENTIE: Imaginile produselor au numai titlu indicativ si pot diferi de imaginea reala a produselor. Acest lucru nu schimba caracteristicile lor de baza.